SMALL MECHANICAL – POWER STEERING PUMP, ALTERNATOR, ABS, COMPRESSOR, ETC
INSPECT & CLEAN
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/inspect.png)
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/clean.png)
-
Confirm part description as well as interchange information on work order matches the part and any special instructions have been completed
-
Inspect the unit for cracks/damage to casings or housing, and any cut wiring or damaged/missing sensors, mounts or any other external parts
-
Use properly sized red plugs to cover any critical openings
-
Thoroughly wash and degrease as necessary to remove dirt and debris
– Not applicable for alternators
TAG & I.D.
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/tag.png)
Stock number or PO number should be engraved or written on the part
SHIP
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/ship.png)
-
All small mechanical parts must be boxed
-
At least 2 inches worth of packing space should surround the unit inside the box
To quickly assess your box size:
Use your index, middle, and ring finger as a minimum width
– check between the outer box wall and the part