INTERIOR PARTS – SEATS, CONSOLES, MISC
INSPECT & CLEAN
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/inspect.png)
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/clean.png)
Confirm part description as well as interchange information on work order matches the part and any special instructions have been completed
– Often times seats will be sold for the use of the attached motor and track assemblies
– Seatbelts are not included with the seat assembly
– Headrests are included in the seat assemblyClean the part as thoroughly as possibleInterior components will rarely be able to be restored to like new condition
– Ensure irreversible wear and tear has been described
– Grease marks
– Heavy cushion denting
– Rips or tears in material
– Broken adjustable components / levers
– Broken mounting tabs or bracketsAvoid spraying or heavily washing seats or other interior components which may absorb water
TAG & I.D.
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/tag.png)
– If this is not possible then no stock number should be applied
SHIP
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/ship.png)
-
Small interior components must be boxed
-
Larger components like bench seats, large cumbersome seats, or dash panels must be wrapped and palletized if they can’t be easily carried by one person
– Use no fewer than two binding straps to secure the part to the pallet; use a buffer like cardboard or styrofoam to prevent the strap from damaging upholstery/finished materials