ELECTRONICS – A/V, ECMs, INSTRUMENTAL CLUSTER, ETC
INSPECT & CLEAN
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/inspect.png)
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/clean.png)
Confirm part description, any available ID #’s as well as interchange information on work order matches the part and any special instructions have been completed
Check for broken/ missing components
– Broken mounting tabs
– Missing, broken or worn dials / buttons
– Cut wires or broken plugsRemove any plug-in wires at their connection point
Wipe and dust the component avoiding heavy liquid usage
– Polish any interior facing lenses
TAG & I.D.
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/tag.png)
Stock number or PO number should be engraved or written on hidden/inward facing portion of part only
SHIP
![](https://urg-website-media.s3.amazonaws.com/wp-content/uploads/2024/02/ship.png)
-
All electronic components must be boxed
-
At least 1-2 inches worth of packing space should surround the unit inside the box
– To quickly assess your box size: Use your index, middle, and ring finger as a minimum width
– Check between the outer box wall and the mirror